-
1 Attachment(s)
Hollywood Junior
Picked up a Hollywood junior the other day and just finished the restoration. I think it turned out pretty good. Used the same methods as described in my post on restoring my 2 Hollywood Turret Tools (loctaed under "Reloading"). These Hollywoods are addicting and getting expensive.
-
That press looks nice and it's good to see one restored!
Some folks here might find it interesting, that this press was Hollywood's option for a more affordable press.
Disclaimer: The info and terms in "quotes" below was obtained from Hollywood literature.
Patented in 1956 and advertised to load pistol, rifle, shotgun shells and swage bullets from .22 through .375. If you ordered the optional 1 1/2" "die holder casting" you could load shotgun shells. I have also seen the "die holder casting" painted with the same "crackle" paint as the base and handle. At some point, the "cylindrical shell holder" was steel and zinc or nickle coated, as were the 3 big "rods" and the 2 "straps", to prevent corrosion (I assume). Later models it was anodized aluminum. The nifty "shell holder collar nut" was partially knurled so you could give it a quick twist to change shell holders. That collar nut is often missing on some presses and has been replaced with a hex nut. Don't let the picture fool you, those 3 long "rods" are 3/4" steel and this press weighs just under 20 pounds.
-
Great job on that! I have one of the huge 12 station turret presses, needs at least one priming assembly. I love almost any old tools. I'm brand new here.
-
1 Attachment(s)
In my post above I said this "At some point, the "cylindrical shell holder" was steel and zinc or nickle coated, as were the 3 big "rods" and the 2 "straps", to prevent corrosion (I assume)".
So, I have since had the press in the lab of an anodizing company and under x-ray analysis they determined the plating is Cadmium. Cadmium plating is used by the aeronautical and marine industry for corrosion protection on steel parts. This makes perfect sense as many Hollywood craftsman were from the aeronautical industry.
Attachment 322791
-
Great job, Love restorations
-
I do find this all very interesting!