For parts … http://www.rollingblockparts.com/.
Type: Posts; User: John Boy
Forum: Single Shot Guns
For parts … http://www.rollingblockparts.com/.
Forum: Rimfire Area
Let’s retrench …. Trigger pull replacement
What was the original ‘ measured’ triggger pull
Forum: Case Forming / Re-forming
Shooting and reloading calibers rarely sold can sometimes get expensive…
But as they say, if one wants to dance, they have to pay the piper
Forum: Cast Boolits
Dan, cases available
for sale . https://www.rccbrass.com/product/257-weatherby-magnum/
Forum: Case Forming / Re-forming
Roberson Cartridge Co … 257’s for sale …
https://www.rccbrass.com/product/257-weatherby-magnum/ 5 bucks and change per case
Forum: Rimfire Area
You could have spent substantial less time just buying the rf cases for $4.25 each .
I started out reforming 25 Stevens out of 22 Hornets and said never again
Forum: Case Forming / Re-forming
Take this to the bank, you’ll learn quick enough when you over bell a case when you put them in the FL sizing die and the die won’t close … one recycle scrap case
Forum: Case Forming / Re-forming
Rule of Thumb … width of case mouth so 1/2 of the bullet base can be seated in the case
Forum: Black Powder Paper Patching
You might want to to measure th rifle bore twist rate which will probably measure 1:18 …
And forget about chasing any of the 38-55 bullets because they will calculate for a 1:18 bore
Forum: Reloading Equipment
Trouble seeing the notches ?
Time to be a digital ….
Forum: Boolit Lube !
No need to add any lanolin if you buy a can of Bag Balm at the drug store for 6 bucks
Custom mold at Accurate Bullet molds … look at their inventory o 10 mm molds first
Forum: Lead and Lead Alloys
Bring melt up to casting temperature …. Drop flux on top of lead …. Burn smoke off with a match … stir the flux DEEP into the melt with sides of the pot scraped and keep stirring until the gray dross...
Forum: Boolit Lube !
If the rings above the stop ring are not groove diameter …. No
Forum: Black Powder Cartridge
I’ve been reloading 45-70, 45-90 and 50-70 and shot shells with 1Fg for years.
With the center fires, they are shot out to 1000 yds, a bit slower but no decrease on accuracy
When I tested 1Fg Ole...
Forum: Cast Boolits
Send an email with a couple pictures to Master Caster.
Probably the majority of us don’t own a Master Caster
All my GCs are Hornaday . Snap, click Done
25 up to 45 calibers
Forum: Lead and Lead Alloys
Took all my muffin tin ingots sorted them by alloy and melted them into 6# ingots in a cast iron ingot mold.
Took about 4 days to clean up the muffin ingots mess for 1700 lbs but all stacked now...
Forum: Rimfire Area
With primed empty brass and my cast 40gr bullets, I’m reloading at a cost of $0.03 a round and can do 50 reload under 20 minutes … nd my costs r it going to go up…
Inventory on hand:
2000 cast...
Forum: Boolit Lube !
Archive thread for your reading
https://castboolits.gunloads.com/archive/index.php/t-136692.html
Forum: "The Barrel Works"
Is this good enough accuracy for a Green Mountain Barrel … 45-70, 500gr bullet on a H&R Classic … 5 reloads BP at 600 yds on paper … 5” group in the 7 ring with a 3 shot clover leaf that could be...
Forum: Muzzleloading.
Estes could recover their purchase price faster by eliminating the subcontracted Yeloow Maple charcoal an switch yo Alder Buckthorn. Increase the mix and polish time's and the quality could bump up...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |