Sent you a PM, I moved my set out of the way over the holidays.
Type: Posts; User: fireball168
Forum: Case Forming / Re-forming
Sent you a PM, I moved my set out of the way over the holidays.
Forum: Single Shot Guns
Like this? Getting ready to throw it in the classifieds on here.
http://i41.photobucket.com/albums/e281/fireball168/IMG_0871_zps4cbac442.jpg
Forum: Hunting with CB's
I've sold one 450 Bushmaster Savage barrel to a Michigan customer this year, keep getting lots of inquiries them and the 50 Beowulf barrels - both fit into the requirements nicely.
In a bolt rifle...
Forum: Gunsmithing Tips & Tricks
Mine sure does.
I do inspections with digital photos and video. I've had guys call me to shops to look at new and used rifles prior to trade in/purchase.
Those inspections can turn into...
Forum: Gunsmithing Tips & Tricks
I've swapped them back and forth without issue.
Just make sure you match the cocking piece with the correct bolt(speed lock).
Less work to have Greg Tannel bush the damaged area.
Forum: Factory Rifles
I have an Badger here if you are interested, $75 will get it to you.
http://i41.photobucket.com/albums/e281/fireball168/image_zps93f7dd73.jpeg
Forum: Gunsmithing Tips & Tricks
No. Even if you had a pressurized coolant system cutting the die, both would normalize in the first minute or so, if not before.
My recommendation would be to form the brass you intend to use...
Forum: Gunsmithing Tips & Tricks
Generally, the bolt nose to bolt face dimension on a Savage is right at .115". Measure yours.
The GO gauge you have should protrude from the breech face when inserted into the chamber .120"+. ...
Forum: Factory Rifles
I've done both .308" and .310" groove barrels, the reamers are virtually the same other than freebore diameter(.0005" over groove) .065" total freebore, 1 degree 30 minute throats. Not CIP.
Forum: Factory Rifles
Looks like I should make another run of 7.62x39 Savage barrels shortly.
Forum: Gunsmithing Tips & Tricks
Hasn't this been addressed this before? And had a response directly from the company?
http://castboolits.gunloads.com/showthread.php?112330-45-colt-octagon-stainless-barrel-blank
You must...
Forum: Factory Rifles
We have varmint contour Savage barrels back in stock, sporter contour barrels are still a few weeks out.
Current run are all 1/7 twist, I'm not opposed to making another run of 1/10 or 1/12 twist...
Forum: Gunsmithing Tips & Tricks
You'll need to machine a straight cylinder just forward of the barrel nut. I'd suggest about 3" forward of the nut for a .900" OD.
I don't believe there isn't enough side thickness in the stock...
Forum: Gunsmithing Tips & Tricks
Trinidad State teaches their students to blue Stainless Steel, I didn't think it could be done either.
Their rates are good, especially for small parts like scope bases. Call them.
...
Forum: CB Loads / Military Rifles
I'll have the sporter contour barrels back in stock in the next couple of weeks or less.
As advertised on this forum:
http://castboolits.gunloads.com/showthread.php?t=133129
I try to keep...
No accuracy complaints as of yet for any of the 300 Blackout Savage barrels I'm peddling.
Forum: "The Barrel Works"
Grafs has both RCBS and Redding in stock.
Forum: Gunsmithing Tips & Tricks
www.bfgcartridges.com
It is what we do.
Forum: Leverguns
Just rebarrel a 336/1895 in 458 BFG, and be done with it(find somebody else to do it though).
Then you'll be able to shoot 458 SOCOM(with a 35 Remington bolt installed), or the rimmed 458 BFG(with...
Bruno's was the least expensive place to buy that I found.
The 90 degree adapter costs more, but is nice if you are working off a bench at a show - or trying to look down a barrel when it is...
Forum: Gunsmithing Tips & Tricks
They may be, I'd suspect you won't have much, if any, luck getting an answer from Ruger on that one.
There seems to be some Ruger connected folks on here that may either know or can find out.
...
Forum: Gunsmithing Tips & Tricks
The 6mm Remington has been offered in the Ruger 77 - call and see if the magazine box & follower are different.
Assuming it is a MK2:
Magazine Box - Short Action D22700 Specify Model & Caliber...
Forum: Leverguns
My 1982 358 does not care for anything other than brass that was originally fired in it.
Not a terrible situation, I bought a good bit of the Jamison 358 brass before their recent problems and can...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |