This is a quick and general CAD rendering of what I hope will be the final iteration of my Automatic-Resin-Mixing Vat.
The dimensions of the vat itself remain basically the same. The only difference are the input and output flow ports.
These will be easily removable and allow for the adjustment of the angle-of-flow. They are designed to slide right into place.
The exact placement within the vat corner walls will be adjusted as soon as I take delivery of the HDPE plastic material I've ordered.
In the mean time I'll continue to run my flow tests with the 3D printed Automatic-Resin-Mixing vats I now have to work with. I'll be uploading those flow tests next week some time.
Incidentally, I went ahead and ordered that slightly more powerful Peristaltic Pump I mentioned in one of my previous post.
I'm starting to see the light at the end of the tunnel for this particular project. I really believe it's going to work out well as a resin mixing tool that doesn't need me to constantly monitor it as my prints are under way.
Please note; this is just a computer rendering. The final vat may have some very slight cosmetic changes but the purpose and the function will be the same.
HollowPoint