0.600" Two Ball Load

[Barry54]

Good luck next weekend!!

Yes. I’m using Precision Spherical Buffer. Just like the tri-ball loads. The wad petals are about 0.007” thinner on the BPI wads vs the precision reloading wads. I didn’t go to the trouble to attempt measuring differences between the thickness of the bottom of the cups. Especially since we already know the PR wads withstand tri-ball.
I guess I can cut down some proper PR wads and try those tomorrow.

[Blood Trail]

Ive had great luck loading double .60 cal balls.
Here’s what I did:

3” Fiocchi hull
26 grs of longshot
MG42 wad with a 20 ga cork wad in the base
1 .60 cal ball
20 ga low profile gas seal on top of the ball
Second .60 cal ball
#47 BPI buffer
Bingo chip
Roll crimp
Pressure came in at 10.2k psi

Here’s 50 yards shooting out of a Mossberg 590A1 with a factory mod choke:




Sent from my iPhone using Tapatalk

[Blood Trail]

Sent from my iPhone using Tapatalk

[Blood Trail]

Sent from my iPhone using Tapatalk

[Blood Trail]

Sent from my iPhone using Tapatalk

[Hogtamer]

I had good luck with that load and killed 150 hog at 60 yds with it. Also busted my eyebrow with the scope! It’s a beast.