Published on 10-24-2014 05:51 PM
Number of Views: 9214
LOAD DETAILS |
GUN TYPE |
7.7 x 58 Arisaka |
FIREARM |
RIFLES |
LEAD TYPE |
paper patched,jacket |
CALIBER TYPE |
7.7x58 jap,made into scout rifle |
RATING |
8 |
LEAD SIZE |
150 |
POWDER TYPE |
imr7383 |
POWDER AMOUNT |
from 40grs to44grs |
PRIMER |
WIN LR |
BRASS |
Mil reformed,and fire formed with 10 gr of unique and 175gr cast bullet,first |
BARREL LENGTH |
21.5 |
F.P.S |
about 2050 to 2300fps |
GROUP SIZE |
5 shots 3/4 to11/4 at 50yds |
OVERALL LENGTH |
? |
GUN DETAILS |
early rifle#52432,when I got it was a rusty mess,but after cleaning up,the chromeed bore was great shape,but way over size,I cut back barrel to 21.5 in,mounted a red dot scope,still the bolt cleared very well,did not have to bend it,used original stock,which was very chewed up,filled in chips and holes,black spray paint works wonders,piller bed it,and free floated barrel.gun wt is 6-3/4 lbs complete. |
OTHER DESCRIPTION |
useed Lc69 brass,had old reforming and triming die,use first,then full sized,my neck dia. was.345 this rifle,so when .318 bullet seated,it was .347,reamed inside necks,so that finished dia was .342 to.343,makes easy chambering,my rifle,after firing forming with 10grs of unique,head dia. was.473 to.474,to keep case centered in chamber a thin line of tape was wraped around edge of head,overall dia at back about .478with tape, full loads,are about .4795 when fired.cases were .464 orignaly |
SUBMITTED ON |
06 Mar 2012 |
SUBMITTED BY |
good shots only |