• .32-20 Winchester (.32 WCF)-MStewardLeather-2

    Rate this article
    Published on 10-16-2014 01:49 PM      Number of Views: 8141  
    0 Comments Comments

     LOAD DETAILS
     GUN TYPE   

    .32-20 Winchester (.32 WCF)
     FIREARM  PISTOL
     LEAD TYPE   Wheel Wts
     CALIBER TYPE   32-20 /.32 H&R Mag
     RATING   10
     LEAD SIZE   115
     POWDER TYPE   Unique
     POWDER AMOUNT   4.2 Gr (4.5 Gr. MAX)
     PRIMER   Fed. Sm. Pistol
     BRASS   Starline
     BARREL LENGTH   3.5 In.
     F.P.S   900 +/-
     GROUP SIZE   1 to 1 1/2 Inchs @ 50 Ft.
     OVERALL LENGTH   3.5 Inches
     GUN DETAILS   Cimarron/ Uberti Mod 1873 "P" Jr. 32-20 / 32 H&R Mag. Duel Cyl. (Size of 22 Single Six) The fit & finish outstanding, no cyl locking bolt drag line after 300 rounds: Problem with 115 gr blts sized .312 /3.8 gr unique it printed 10 in. low and 6 in. to right. Increasing the load to 4.2 grs. of unique and increased size to .314 dia. shrank the best groups to about an inch at 50 ft. from a sand bag rest. I then filed to front sight with try and error by about half. Opened the rear sight to the left and it now prints dead on.
     OTHER DESCRIPTION  This is a great fun gun. I found an Original Winchester "nut cracker" tool in 32-20 WCF, on Ebay, that turns out neck sized rounds faster that a single stage press. The Lee case length gage in M-1 carbine will drop in as a replacement decapper, as it is often lost. I made a brass powder dipper from a cut down 9mm case with a wire handle that works great. Its not as fast as my Dillon, but its more fun.
     SUBMITTED ON   21 Feb 2007
     SUBMITTED BY   MStewardLeather

  • Last 5 Loads

  • Old Articles

Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links