Main Menu- GunLoads Hosted Sites
- Our Goal
-
.32-20 Winchester (.32 WCF)-MStewardLeather-2
LOAD DETAILS
GUN TYPE .32-20 Winchester (.32 WCF)
FIREARM PISTOL LEAD TYPE Wheel Wts CALIBER TYPE 32-20 /.32 H&R Mag RATING 10 LEAD SIZE 115 POWDER TYPE Unique POWDER AMOUNT 4.2 Gr (4.5 Gr. MAX) PRIMER Fed. Sm. Pistol BRASS Starline BARREL LENGTH 3.5 In. F.P.S 900 +/- GROUP SIZE 1 to 1 1/2 Inchs @ 50 Ft. OVERALL LENGTH 3.5 Inches GUN DETAILS Cimarron/ Uberti Mod 1873 "P" Jr. 32-20 / 32 H&R Mag. Duel Cyl. (Size of 22 Single Six) The fit & finish outstanding, no cyl locking bolt drag line after 300 rounds: Problem with 115 gr blts sized .312 /3.8 gr unique it printed 10 in. low and 6 in. to right. Increasing the load to 4.2 grs. of unique and increased size to .314 dia. shrank the best groups to about an inch at 50 ft. from a sand bag rest. I then filed to front sight with try and error by about half. Opened the rear sight to the left and it now prints dead on. OTHER DESCRIPTION This is a great fun gun. I found an Original Winchester "nut cracker" tool in 32-20 WCF, on Ebay, that turns out neck sized rounds faster that a single stage press. The Lee case length gage in M-1 carbine will drop in as a replacement decapper, as it is often lost. I made a brass powder dipper from a cut down 9mm case with a wire handle that works great. Its not as fast as my Dillon, but its more fun. SUBMITTED ON 21 Feb 2007 SUBMITTED BY MStewardLeather 
Last 5 Loads- Old Articles
Abbreviations used in Reloading
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Rate this article