LOAD DETAILS |
|
GUN TYPE | .32-20 Winchester (.32 WCF) |
FIREARM | PISTOL |
LEAD TYPE | Wheel Wts |
CALIBER TYPE | 32-20 /.32 H&R Mag |
RATING | 10 |
LEAD SIZE | 115 |
POWDER TYPE | Unique |
POWDER AMOUNT | 4.2 Gr (4.5 Gr. MAX) |
PRIMER | Fed. Sm. Pistol |
BRASS | Starline |
BARREL LENGTH | 3.5 In. |
F.P.S | 900 +/- |
GROUP SIZE | 1 to 1 1/2 Inchs @ 50 Ft. |
OVERALL LENGTH | 3.5 Inches |
GUN DETAILS | Cimarron/ Uberti Mod 1873 "P" Jr. 32-20 / 32 H&R Mag. Duel Cyl. (Size of 22 Single Six) The fit & finish outstanding, no cyl locking bolt drag line after 300 rounds: Problem with 115 gr blts sized .312 /3.8 gr unique it printed 10 in. low and 6 in. to right. Increasing the load to 4.2 grs. of unique and increased size to .314 dia. shrank the best groups to about an inch at 50 ft. from a sand bag rest. I then filed to front sight with try and error by about half. Opened the rear sight to the left and it now prints dead on. |
OTHER DESCRIPTION | This is a great fun gun. I found an Original Winchester "nut cracker" tool in 32-20 WCF, on Ebay, that turns out neck sized rounds faster that a single stage press. The Lee case length gage in M-1 carbine will drop in as a replacement decapper, as it is often lost. I made a brass powder dipper from a cut down 9mm case with a wire handle that works great. Its not as fast as my Dillon, but its more fun. |
SUBMITTED ON | 21 Feb 2007 |
SUBMITTED BY | MStewardLeather |
LOAD DETAILS |
|
GUN TYPE | .32-20 Winchester (.32 WCF) |
FIREARM | PISTOL |
LEAD TYPE | Wheel Wts |
CALIBER TYPE | 32-20 /.32 H&R Mag |
RATING | 10 |
LEAD SIZE | 115 |
POWDER TYPE | Unique |
POWDER AMOUNT | 4.2 Gr (4.5 Gr. MAX) |
PRIMER | Fed. Sm. Pistol |
BRASS | Starline |
BARREL LENGTH | 3.5 In. |
F.P.S | 900 +/- |
GROUP SIZE | |
OVERALL LENGTH | |
GUN DETAILS | |
OTHER DESCRIPTION | |
SUBMITTED ON | 21 Feb 2007 |
SUBMITTED BY | MStewardLeather |
LOAD DETAILS |
|
GUN TYPE | .32-20 Winchester (.32 WCF) |
FIREARM | PISTOL |
LEAD TYPE | Plain wheelweights |
CALIBER TYPE | 32-20 Winchester |
RATING | 9 |
LEAD SIZE | 100 |
POWDER TYPE | Unique |
POWDER AMOUNT | 6 Grains |
PRIMER | CCI Small Rifle |
BRASS | Remington |
BARREL LENGTH | 25 inches |
F.P.S | 1600 fps |
GROUP SIZE | 1.4 inches |
OVERALL LENGTH | Not Sure |
GUN DETAILS | !894CL Marlin with deep-cut Ballard rifling |
OTHER DESCRIPTION | |
SUBMITTED ON | 19 Apr 2007 |
SUBMITTED BY | Anonymous |
LOAD DETAILS |
|
GUN TYPE | .32-20 Winchester (.32 WCF) |
FIREARM | PISTOL |
LEAD TYPE | Hornady |
CALIBER TYPE | .32-20 (Revolver) |
RATING | 8 |
LEAD SIZE | 90 |
POWDER TYPE | Unique |
POWDER AMOUNT | 3.4 gr. |
PRIMER | Winchester small rifle |
BRASS | Winchester |
BARREL LENGTH | 5 In. |
F.P.S | |
GROUP SIZE | |
OVERALL LENGTH | |
GUN DETAILS | Colt Army Special, Mfd.1923 |
OTHER DESCRIPTION | |
SUBMITTED ON | 09 Dec 2007 |
SUBMITTED BY | Anonymous |
LOAD DETAILS |
|
GUN TYPE | .32-20 Winchester (.32 WCF) |
FIREARM | PISTOL |
LEAD TYPE | SWC |
CALIBER TYPE | .32-20 |
RATING | 8 |
LEAD SIZE | 90 |
POWDER TYPE | Universal Clays |
POWDER AMOUNT | 3.5 |
PRIMER | Winchester Small Rifle |
BRASS | Remington |
BARREL LENGTH | 20 |
F.P.S | 1300 |
GROUP SIZE | 2 |
OVERALL LENGTH | 1.58 |
GUN DETAILS | Winchester 1892 Carbine, made in 1906 |
OTHER DESCRIPTION | Great CAS load, good plinking load. Make sure that point of bullet stays flat for safe use in tubular magazine. |
SUBMITTED ON | 28 Jul 2007 |
SUBMITTED BY | Anonymous |
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |