Do your weapon loads appear in our Reloading section?

The answer could be YES. Basically, these specific threads are here to discuss loads, find loads, and expirement with loads. Once the loads that we discuss are accurate, I will display them in the "Reloading" section of the site. The reason for not just putting the loads in the section is so that members can confirm that they are accurate and not too powerful. Thus causing someone to get hurt or gun damage. This way the loads provided are good for beginners and work for advanced reloaders as well.
Thanks!

I have one load that I use in my 6mm Rem 700VLS:
Bullet: 70 gr Nosler Bal Tip
Case: R-P
Primer: Federal 210M
Powder: 47.5 grs. IMR 4350
Cart. OAL: 2.925"
Case Length: 2.225"
Notes: The cartridge overall length is too long for most magazines(have single shot follower in mine)
This load is 1 grain under max according to the Lyman manual and 70 grain bullet they use.
This load will shoot 1/2 to 5/8" 3 shot groups at 100 yds. and under 3" groups at 500 yds.
Optics used on my gun: Leupold 6.5-20x40 VariXIII,Weaver bases,Millet Rings
I have fired over 200 rounds in my gun and it seems to be very accurate and consistent.
My F1 Chrony registers an average 3600FPS for 10 shots with 72deg. ambient temps.
I hope this can be added to our data base. Bob in Indiana

I've added it to the Rifle database under the 6mm section. Thanks for the load!
Sounds like you got a nice shooter there.

This load is really accurate in my Rem 700BDL-24"bbl
Bullet--50gr Nosler BT or Sierra 50gr Blitz King
Case- R-P
Primer- Fed 205M
Powder- 20 gr. IMR 4198
Cart. OAL- 2.225
Case Length- 1.690
Notes: OAL is too long for most magazine rifles
I have single shot follower in mine.
This load is 1/2gr under similar load that Lyman lists for the 50 Gr Sierra blitz
Scope is Leupold 6.5-20x40 with Weaver bases and rings
My F-1 Chrony registers average velocity of 3050fps for 10 shots @ 72 deg.
This is one of many loads that have proven very accurate in my rifle or my 15"barreled T/C Contender single shot pistol.

Didn't see new heading for adding loads til I posted this.....will enter them under that heading next time.

Thanks for the load!
Yea the Submit Load has just been put up to make it easier for load submission.
I recieved your other load, and it will be put up. :)