Boy, if you can't kill it with that bullet then it didn't come from this planet!!! That is a LOT of lead.
Boy, if you can't kill it with that bullet then it didn't come from this planet!!! That is a LOT of lead.
Qajaq59
One slow hit is better then 500 quick misses. "It ain't the noise that kills 'em!!!!"
weve got to get some dialog going here. i could have saved you $100 on that lot.
I have taken note vic
thank you
Canuck
Canuck4570,
Here's something to contemplate. Since you'll be going sans GC, big and heavy and slow (582 gr. wow). think about getting one of those heavy things HP'd. it will aid expansion at those low speeds and since at that weight they're liable to go completely through anything anyway, might as well make a 2" diameter hole through stuff rather than a 1/2" hole.
By the way, what's the twist rate on that Steyr? is it fast enough for that long a CB?
Brian
hi canuck glad to see that i am not the only one that wanted a 450Marlin boltgun!! i built my gun on a savage 110 lh action. the load that i like is 330hp(457122)/55gr aa2230/wlr with a GC upside down between the powder and boolit. this load will do 2100fps form my gun and stay inside 3"at200yds. IMHO this will make a great whitetale load Clint
1/20 twist
if you go to JBM ballistic they have a stability factor and it ok for that twist its a new way made by a certain miller and it is suppose to be much more accurate than the green hill formula
on the JBM their is god reading concerning this .... I have the book "applied ballistics for long range shooting by Bryan Litz who work's for Berger bullet and their is a chapter on this
also this bullet shoot very accurate in my ruger 4570 so it mus be correct
as for the hollow point there is a thread on cast bullet showing a drill press vice rig up to make hollow point Yes you can bet on it they will be hollowpointed....
thank you for advice
http://www.jbmballistics.com/~jbm/cg...bmstab-5.0.cgi
Last edited by canuck4570; 09-19-2009 at 02:42 PM.
You need a varmit bullet for that rig. Why not a 485gr PP cast of pure lead. No hollow point needed and you can go for serious velocity using jacketed data.
Just a thought.........
SS
NRA Life Member Since 1981
"The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good"-- George Washington
II Corinthians 4:8-9. We are hard-pressed on every side, yet not crushed; we are perplexed, but not in despair; persecuted but not forsaken, struck down, but not destroyed."
Psalms 25:2 O my God, I trust in thee: let me not be ashamed, let not mine enemies triumph over me.
[SIGPIC][/SIGPIC]
yes but what about my shoulder
You've got another one, don't worry about it.
"A cheerful heart is good medicine."
here is a picture of my 4570 ruger no 1
the ramp was modified by my son to accept a scout scope
the scope is a Burris pistol scope 2-7x32 with ballistic plex
this rifle shoot very accurate with any thing
[IMG][/IMG]
Nice!
"A cheerful heart is good medicine."
You oughta try getting some brass up here for the .45-110 and .50-140 Sharps cartridges. I'd love to get brass for a buck a piece. I'm looking at between $4 and $5 now that the US gov't has clamped down on brass exports.
Chris.
try buffalo arms they shipped to my friend under brass article
http://http://www.buffaloarms.com/
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |